Get answers, not
runaround.
Search setup guides, firmware fixes, and support resources by entering keywords below.
Adding IP camera Via PoE switch (Using NVR)
1.Connect IP camera to any PoE port on a gigabit PoE switch. Link the uplink port on switch to LAN port of recorder.
2. Login to recorder, go to Camera > Camera List. (The camera should appear with a red cross showing "Uninitialised)
3. Select camera and click "Initialize" top right.
Select DHCP if a router is connected
Set a static IP if no router is connected.
4. Click search device, camera will show with new IP. Select the camera and click "Add". Camera will now show live in the bottom section.